Lenze 490 Series User Manual

NK12/fa ~.ck~4: G3.11~B9
8.3 dontrobber inhibit
The previousby used function RSP (inhibiting the controbber
using a normabby open contact) is still avaibabbe.
When the switch controbler inhibit is closed, the firing
pulses are set to the inverted limit position.
Use bw current
contact
<15V/l.5 mA)
daution: The switch RSP must only be opened at motor
standstibb.
8.4 Inching
The wire bridges BRl, BR2 and BR3 on the
must be removed.
PELl L2~L3Jfj
1J
Kl
F2 r
L~ ~2 L3
boards 4092 or 4093
Conf
iguration
of mains contactors
daution
When inching with
Kl the ebectronic
suppby is still
maintained. The
mains is compbeteby
separated by
a
mains switch.
mein switch
Appbication proposab for fast inching
K3
REL/TRP-15
part no. 321 351
Lanze
Inching is done via S4 (switch).
The switching using quick stop causes fast deceleration in the
inverter mode.

Lenze 490 Series Specifications

General

Brand	Lenze
Model	490 Series
Category	Controller
Language	English