Levoit LUH-A601S-WUSB User Manual

24
VESYNC APP TROUBLESHOOTING
Why isn’t my humidifier connecting to the
VeSync app?
•
Make sure your phone has Bluetooth®
turned on and is not currently connected
to another Bluetooth device.
• During the setup process, you must be
on a secure 2.4 GHz WiFi® network.
Confirm that the network is working
correctly.
• Make sure the WiFi password you
entered is correct.
• Make sure your humidifier and phone are
within 30 ft / 10 m of each other.
• Reset the humidifier by pressing and
holding
for 15 seconds. Then try
connecting again.
My humidifier is oine.
•
Make sure the humidifier is plugged in.
The humidifier may appear to be oine
if it is unplugged, or if the outlet does not
have power.
• Refresh the VeSync menu by swiping
down on the screen.
• Make sure your router is connected to
the internet and your phone’s network
connection is working.
• Reset the humidifier using one of these
options:
a. Delete the humidifier from the
VeSync app. Swipe left (iOS®) or
press and hold (Android), then tap
Delete. Then reconfigure your
humidifier with the VeSync app.
b. Press and hold for 15 seconds.
Then reconfigure your humidifier
with the VeSync app.
The VeSync app is displaying an incorrect
humidity percentage while the humidifier
is turned on.
•
The room may be larger than the
humidifier’s eective range. Move to a
room smaller than 505 ft² / 47 m².
• Moisture may have built up inside the
humidity sensor. Turn o the humidifier
and allow the sensor to air dry. Make sure
the nozzle is facing away from the sensor
so that mist does not settle on the sensor
(see diagram in
Getting To Know Your
Smart Humidifier, page 5).
Note: Power outages, internet outages, or
changing WiFi routers may cause your humidifier
to go oine.

Levoit LUH-A601S-WUSB Specifications

General

Brand	Levoit
Model	LUH-A601S-WUSB
Category	Humidifier
Language	English