The VeSync app allows you to access
additional smart air purifier functions, including
those listed below. As the app develops, more
features may become available.
Remote Control
• Change any air purifier settings
through the app, even while
Display Lock is on.
Timer Function
• Set a timer between 1–24 hours.
• Easily view the exact time remaining
on a timer.
Air Quality Updates
• View real-time PM2.5 updates in
the app.
• See your air quality history for the
previous week.
Filter Replacement Info
• Keep tabs on the remaining filter life
by checking the filter life percentage
in the app.
• Shop for replacement filters.
Schedules
• Create and customise schedules for
your air purifier to match your routines.
Auto Mode
• Access additional Auto Modes: Quiet
Auto Mode and Ecient Auto Mode.
• Quiet Auto Mode never uses the 2
highest fan speeds to avoid making
too much noise.
• Ecient Auto Mode lets you choose
the size of the area you want to
purify. The air purifier will use the
highest fan speed to clean the air
in that area. Once your air is clean,
it will lower to the fan speed best
suited to the selected room size.
VeSync App Functions
USING YOUR PURIFIER CONT.
The air purifier is in Standby Mode when it is
turned o, but plugged in.
Note: Display Lock can be used while
the air purifier is in Standby Mode to
keep the air purifier from being turned
back on. The laser dust sensor will still
detect the surrounding air quality and
give you updates in the VeSync app.
When the air purifier is plugged in and
turned o, it will remember its previous fan
speed, Sleep Mode, Auto Mode, Display
Lock, and Display O settings.
When the air purifier is unplugged and
turned o, it will only remember its previous
fan speed, Sleep Mode, and Auto Mode.
Note: The air purifier will remember the
last timer setting chosen (1–12 hours), but
it will not automatically resume the timer.
You will need to restart the timer after the
air purifier is turned back on.
Memory Function
Standby Mode
EN
11
To Next Page
Loading...
Need help?
General
