Using the control panel
1
From the control panel, navigate to:
Settings >
> Network/Ports > > Wireless > > Setup On Printer Panel > > Choose
Network >
2 Select a Wi‑Fi network, and then type the network password.
Note: For Wi‑Fi‑network‑ready printer models, a prompt to set up the Wi‑Fi network appears during initial
setup.
Using Lexmark Mobile Assistant
1
Depending on your mobile device, download the Lexmark Mobile Assistant app from either Google Play
TM
or App Store.
2 From the printer control panel, navigate to:
Settings >
> Network/Ports > > Wireless > > Setup Using Mobile App > > Printer ID
>
3 From your mobile device, launch the app, and then accept the Terms of Use.
Note: If necessary, grant permissions.
4 Tap Connect to Printer > Go to Wi‑Fi Settings.
5 Connect your mobile device to the printer wireless network.
6 Return to the app, and then tap Setup Wi-Fi Connection.
7 Select a Wi-Fi network, and then type the network password.
8 Tap Done.
Connecting the printer to a wireless network using Wi‑Fi Protected Setup
(WPS)
Note: This feature is available only in some printer models.
Before you begin, make sure that:
• The access point (wireless router) is WPS‑
certified
or WPS‑compatible. For more information, see the
documentation that came with your access point.
• A wireless network adapter is installed in your printer. For more information, see the instructions that came
with the adapter.
• Make sure that Active Adapter is set to Auto. From the control panel, navigate to:
Settings >
> Network/Ports > > Network Overview > > Active Adapter > > Auto >
Set up, install, and configure 26
To Next Page
Loading...
Need help?
General
