Lexmark W820 User Manual

253
MAC Binary PS
Purpose:
To configure the printer to process Macintosh binary PostScript print jobs.
Values:
Network Buffer
Purpose:
To configure the size of the network input buffer.
Values:
Note: Changing the Network Buffer menu item automatically resets the printer.
See also:
Resource Save
Network <x> Setup
Purpose:
To configure an internal print server.
Values:
Values for this menu item are supplied by the specific print server. Select the menu item to see the
available values.
Note: Refer to the documentation on the drivers CD for more information.
On Printer processes raw binary PostScript print jobs from computers using the Macintosh
operating system.
Note: This setting often causes Windows print jobs to fail.
Off Printer filters PostScript print jobs using standard protocol.
Auto* Printer processes print jobs from computers using either Windows or Macintosh operating
systems.
Auto* Printer automatically calculates the Network Buffer size (recommended
setting).
3K to maximum
size allowed
User specifies the Network Buffer size. The maximum size depends on the
amount of memory in your printer, the size of the other link buffers, and
whether Resource Save is set to On or Off. To maximize the range for the
Network Buffer size, disable or reduce the size of the parallel, serial, infrared,
LocalTalk, and USB buffers.
Downloaded From ManualsPrinter.com Manuals

Lexmark W820 Specifications

General

Brand	Lexmark
Model	W820
Category	Printer
Language	English