71
Clearing jams from the printer
Tray 1 and the print cartridge area
Note: The following instructions are written assuming you are using the multipurpose
feeder and the duplex unit. If you are using the envelope feeder, you must remove
it before opening the duplex unit door. For instructions, see Removing the
optional envelope feeder.
1 Open the multipurpose feeder.
2 Push up on the latch to release the duplex unit door (Door E).
3 Gently lower the door to the open position.
4 Pull up on handle to open the printer side door (Door A).
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
Need help?
General