LIP-9002 Button Layout
9. Speaker
8. Volume
Speed Dial
Lift the handset
Press the Speed button
Dial the desired System or Station Speed Dial number
Last Number Redial (LNR)
Press the Speed button.
Dial *
Use the Volume keys to select from the last 15 numbers dialed
Press Hold to dial
Quick access call tools
Ericsson-LG Enterprise
iPECS LIP-9002 Handset Key Features Guide
1. Transfer: transfer the current active call or
access the Program menu while the phone
is idle.
2. Speed: assign or use assigned speed dial
numbers.
3. Message: access your voicemail box.
4. Headset: if a headset is plugged in this
button allows you to toggle between the
headset and handset.
5. Hold: place a call on hold – the caller will
receive on-hold music or comfort tones.
6. Mute: mute the call so that the caller cannot
hear your voice.
7. DND (Do-Not-Disturb): blocks incoming
calls. You can also activate Do-Not-Disturb
while the phone is ringing - this terminates
the call and the caller will get a busy tone.
8. Volume control: adjust the Ring, Headset,
Handset, and Speaker volume.
9. Speakerphone: toggle the speakerphone
On and Off during a call. The button will
automatically illuminate when the phone is in
menu mode.
10. Flex keys: a line or feature can be assigned
to these buttons.
11. LCD screen: phone interface for status,
dialing directories, and text message
information.
1.
2.
3.
4.
5.
6.
7.
Button Guide
}
10. Flex Keys
10. LCD Screen
Dealing with calls
Answering an Incoming Call
Lift the handset. To answer a call on another extension, press the ashing ex key and then lift the
handset.
Making an External Call
Lift the handset and press a free ex key allocated to a line, or the 9 key to pick up an outside line.
Once you have the outside line, dial your number.
Making an Internal Call
Lift the handset. Dial the extension number or press the ex key assigned to the contact.
Rejecting a Call
Press the DND button when a call comes in.
Call Pick Up
Lift the handset and dial 566 to pick up any handset in your group, or dial *77 and the station
number to pick up a handset that’s not in your group.
Placing a call on hold
Press the HOLD button. To reconnect the call, press the Green ashing ex key.
To Next Page
Need help?
General
