DDVVDD
11
When connecting with a S-Video cable
Connect the S-VIDEO output of the DVD to the
SS--VVIIDDEEOO
input on the set.
Connect the audio outputs of the DVD to the
AAUUDDIIOO
input jacks on the set.
Turn on the DVD player, insert a DVD.
1
2
3
Select AV 3 input source with using the
IINNPPUUTT
button on
the remote control.
4
Refer to the DVD player's manual for operating instruc-
tions.
5
When connecting with a HDMI cable
Connect the HDMI output of the DVD to the
HHDDMMII IINN
jack on the set.
Select HDMI input source with using the
IINNPPUUTT
button
on the remote control.
Refer to the DVD player's manual for operating instruc-
tions.
1
2
3
NOTE
GG
TV can receive the video and audio signal simultaneously with using a HDMI cable.
GG
If the DVD supports Auto HDMI function, the DVD output resolution will be automatically set to
1280x720p.
GG
If the DVD does not support Auto HDMI, you need to set the output resolution appropriately. To get the
best picture quality, adjust the output resolution of the DVD to 1280x720p.
To Next Page
Loading...
Need help?
General
