To Next Page

To Previous Page

Only for training and service purposes

4.4. Tool Option Area Option Change

Before PCBA check, have to change the Tool option and Area

option

Option values are below

(If no changed the option, the input menu can differ the model

spec.)

The input methods are same as other chassises(Use adj Key

on the Adjust Remote control)

4.5. Color carrier Adjustment

(Inspection process)

(1) Tuning the RF signal

MD : NTSC US 4 CH)

(2) push the "adj" key in the adjustment remote control.

5. EDID

(The Extended Display Identification Data )

/DDC(Display Data Channel) download

* Caution

- Use the proper signal cable for EDID Download.

- Never connect HDMI & D-SUB Cable at the same time.

- Use the proper cables below for EDID Writing.

* EDID Data

- XGA

=> Detail EDID Options are below(a, b, c, d, e)

a. Product ID

- 14 -

Tool Option

Inch MD

Area Option Depend on PR

Item

Manufacturer ID

Version

Revision

Condition

GSM

Digital : 1

Digital :3

Data

1E6D

For RGB EDID For HDMI EDID

Addr 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F

0000 00 FF FF FF FF FF FF 00 1E 6D

0010 01 03 80 46 27 78 EA D9 B0 A3 57 49 9C 25

0020 11 49 4B 81 08 00 01 01 01 01 01 01 45 40 01 01

0030 61 40 01 01 01 01 1B 21 50 A0 51 00 1E 30 48 88

0040 35 00 BC 88 21 00 00 1C 4E 1F 00 80 51 00 1E 30

0050 40 80 37 00 BC 88 21 00 00 18

0060 00 00 00 FD

0070 00 3A 3F 1F 32 09 00 0A 20 20 20 20 20 20 01

0080 02 03 25 F1 52 01 06 07 15 16 02 03 11 12 13 04

0090 14 85 20 21 22 1F 10 23 09 07 07 83 01 00 00 65

00A0 03 0C 00 10 00 01 1D 00 80 51 D0 1C 20 40 80 35

00B0 00 BC 88 21 00 00 1E 8C 0A D0 8A 20 E0 2D 10 10

00C0 3E 96 00 13 8E 21 00 00 18 8C 0A A0 14 51 F0 16

00D0 00 26 7C 43 00 C4 8E 21 00 00 98 01 1D 80 18 71

00E0 1C 16 20 58 2C 25 00 C4 8E 21 00 00 9E 00 00 00

00F0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00