12
ENGLISH
Other Connections
Connect your TV to external devices. For the best
picture and audio quality, connect the external
device and the TV with the HDMI cable. Depending
upon the model, a cable may not be provided.
Remote Control
(Depending upon model)
The descriptions in this manual are based on
the buttons on the remote control. Please read
this manual carefully and use the TV correctly. To
install batteries, open the battery cover, replace
batteries (1.5 V AAA) matching the and ends
to the label inside the compartment, and close the
battery cover. Failure to match the correct polarities
of the battery may cause the battery to burst or
leak, resulting in fire, personal injury, or ambient
pollution.To remove the batteries, perform the
installation actions in reverse. This remote uses
infrared light. When in use, it should be pointed in
the direction of the TV’s remote sensor.
CAUTION
Do not mix old and new batteries, as this may
damage the remote control.
A
(POWER) Turns the TV on or off.
Changes the input source.
Activates or deactivates the subtitles.
(User Guide) Sees user-guide.
Resizes an image.
Returns to the last TV channel.
Number button Enters numbers.
- (Dash) Inserts a dash between numbers such as
2-1 and 2-2.
Accesses the saved channel list.
Alternates between the two last channels
selected (pressing repeatedly).
Adjusts the volume level.
Accesses your favorite channel list.
Shows information on the current program.
Mutes all sounds.
Scrolls through the saved channels.
Moves to the previous or next screen.
B
Shows the previous history.
(Home) Accesses the Home menu.
Shows the list of Apps.
Accesses the quick settings.
Shows the list of Channels.
Navigation buttons Scrolls through menus or
options. (up/down/left/right)
Selects menus or options and confirms your
input.
Returns to the previous screen.
Clears all on-screen displays and returns to TV
viewing.
Sets the length of time until the TV to turns off.
Enables SAP (Secondary Audio Program) Feature.
Control buttons ( , , , , ) Controls the
SIMPLINK compatible devices (USB, SIMPLINK).
Color buttons These access special functions in
some menus. ( , , , )
Magic Remote Functions
(Depending upon model)
When the message
Magic remote control battery
is low. Change the battery.
is displayed, replace the
battery. To install batteries, open the battery cover,
replace batteries (1.5 V AA) matching and ends
to the label inside the compartment, and close the
battery cover. Failure to match the correct polarities
of the battery may cause the battery to burst or leak,
resulting in fire, personal injury, or ambient pollution.
Be sure to point the remote control at the remote
control sensor on the TV. To remove the batteries,
perform the installation actions in reverse.
This remote uses infrared light. When in use, it
should be pointed in the direction of the TV’s
remote sensor.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
