17
ENGLISH
4. Screw down four dummy screws right side.
5. Check that the door closes and latches properly.1.
Move door to left side and insert a hinge to hinge hole.
2. Hold on hinge while screw down a hinge
(to prevent door dropping).
3. Insert latch to right side and install screws.
Reversing the Door
w
WARNING
the door.
THE DRYER DOOR IS VERY LARGE AND HEAVY. Failure
to follow the instructions below can result in damage
to the dryer, property damage or injury to persons.
Latch
Screw
Hinge Screw
Decorative
Hinge
Screw
Swing Door
Hinge hole
INSTALLATION INSTRUCTIONS
CAUTION
Be sure to support the weight of the door before
removing the hinge screws.
MFL67731008_en_160524.indd 17 2016.5.24 10:51:29 AM
To Next Page
Loading...
Need help?
General
