15INSTALLATION
ENGLISH
• For safety reasons, two or more people need to
work together to reverse the door.
• The appearance of the screws varies and the
screws must be inserted differently depending
on the position. Make sure that you've selected
the correct screw before tightening.
1 Open the door and remove 2 screws on the
door hinge
a. Remove the door from the
cabinet b and place it inside facing up on a
non-scratching surface.
• Be sure to support the weight of the door before
removing the hinge screws.
2 Remove 8 screws and remove the hinge
assembly c from the door.
• There are 6 screws on the front and 2
screws on the side.
3 Remove the 3 screws from the door latch
assembly
d which is mounted between the
door and the hinge assembly. Remove the
screw in the door latch.
4 Swap the position of the hinge assembly c
and the door latch assembly
d and
reassemble. Refer to steps 2 and 3 for the
location and number of screws when
reassembling.
5 On the appliance cabint, unscrew 2 screws
and remove the door catch
e. Reassemble it
on the opposite side of the door.
6 Remove the 2 decorative screws from the
appliance cabinet and insert them on the
opposite side.
To Next Page
Loading...
Need help?
General
