32
MAINTENANCE
EN
Clean the outer filter
1
Remove the dust or lint around the filter inlet.
• When the lint drops into the filter inlet, it may
cause degradation of drying performance and
increase in drying time.
2
Pull out the outer filter.
3
Remove the inner filter.
4
Open the outer filter by unfolding in the
direction of the arrow grasping the top edge of
the outer filter.
5
Clean the residual lint using vacuum cleaner or
washing under running water.
• Dry the filter completely if the filter is moist.
Failure to do so, odour may occur in the
appliance.
• DO NOT tap the filter repeatedly as the built
in magnet may dislodge and cause a
malfunction.
6
Close the outer filter while pushing the side
a
of the filter.
• Ensure the side of the filter is closed properly.
Failure to do so, any lint accumulated on the
filter may get into the appliance and may cause
degradation of the drying performance.
7
Close them, and reinsert the both lint filters.
• Do not load or remove any clothes when the lint
filter is not in a place. The clothes can drop into
the the filter inlet and it may cause the appliance
to malfunction.
To Next Page
Loading...
Need help?
General
