•l«
Quick Set-up Guide
To
install
of
your product, please
read this
guide
manual carefully and completely.
Slim Portable DVD Writer
AP60/GP60/SP60
Features System Environment
•
Universal Serial Bus (USB) 2.0 interface for high-speed data transfer.
•
Buffer
Under Run error protection technology
•
Emergency eject support
•
Combination of CD-R/RW, DVD-R/RW,
DVD+R/RW,
DVD+R DL,
DVD-R
DL, M-Disc (DVD+R SL) and DVD-RAM
drive
functions into one
drive.
•
Supports region playback control
Phase II.
•
PC
USB
powered, no AC adapter needed.
•
Supports TV Connectivity
Package
Items
Item Quantity
-
Slim
Portable DVD Writer
-
USB 2.0 cable
-
Software Installation disc
(for
Windows only)
-
Quick Guide for
Drive
1
1
1
1
System meeting
the following requirements
is
needed
in order to use USB
2.0 operation with this drive.
•
Computer that is equipped with a USB 2.0
-
compliant USB connector or PCI
adapter card, and on which the USB 2.0 EHCI (Enhanced Host Controller
Interface) driver software
’)
has been installed.
h
The USB 2.0 EHCI driver software is supplied with currently available PCI
adapter cards that conform to USB 2.0.
Further,
Microsoft has released the USB
2.0 EHCI driver software for Windows XP, therefore it is also possible to
use
this
driver software with Windows
XP
SP3.
If you want to know in detail,
please
contact your USB 2.0 adapter dealer or
consult your PC
manufacturer, or consult the Microsoft
Corporation Web site.
•
Under Windows
8
operating system, a specific mainboard with nVidia GeForce
7025 Chipset may cause an abnormal operation.
MFL6 7 9 0 0 0
0 2
Computer
This unit
can be operated in the
system environment
explained
here.
System
requirements
CPU
Pentium IV 2.4 GHz or Higher(with
USB
2.0)
for basic
performance (Recommended for optimal performance:
Pentium IV 3.2 GHz or Higher).
Memory
256 MB
or larger (Recommended: 512
MB).
Hard disk 20 GB
or more
free space.
(The free
space needed for writing
depends on the quantity of data.)
Video Memory
64 MB (Recommended: 128 MB).
Interface
USB
2.0
port
CD-ROM drive
For Software installation
Software Required
OS
Windows 8.1 /Windows 8/Windows 7/Windows Vista
(32
bit, 64
bit)/
Windows XP SP3. Mac
OS
X v.1 0.5.4 or Hiaher. Direct X
9.0
or Hiaher
CD-R, CD-RW,
DVD-R,
DVD-RW,
DVD+R, DVD+RW,
DVD-RAM,
DVD±R
DL discs
CD-R : LG, Mitsubishi Kagaku Media, Verbatim, That’s, TDK,
Ritek or
HP
discs
are
recommended.
CD-RW : LG, Mitsubishi Kagaku Media, Verbatim are
recommended.
DVD-R : Mitsubishi Kagaku Media, Maxell, That’s
are
recommended.
DVD-RW
:
Victor.
JVC, Mitsubishi Kagaku Media, TDK are
recommended.
DVD+R :
Mitsubishi Kagaku Media, Thafs, Maxell are
recommended.
DVD+RW : TDK, Mitsubishi Kagaku Media, Ricoh are
recommended.
DVD-RAM
: Maxell, Mitsubishi Kagaku Media are recommended.
M-Disc (DVD+R SL) : Millenniata
DVD±R DL : Mitsubishi Kagaku Media, Verbatim are
recommended.
*
For Windows 8.1 /8/7/Vista, 1 GB of RAM or large is recommended.
*
Compatibility problem in write/read function may occur with some media depending
on the media manufacturing quality.
*
To achieve maximum Record & Write speed your system may require data to be
copied first to the computer’s hard drive rather than directly from another source disc
or drive.
*
Please visit http://www.m-disc.com
to
learn
more
about the M-DISC™.
Specifications
Supported Discs DVD-ROM(Single/Dual), DVD-RW, DVD-R,
DVD+RW, DVD+R, DVD+R Double
layer, DVD-R
Dual
layer, DVD-
RAM,
M-Disc (DVD+R SL), CD-
Digital Au'dio
&
CD-Extra, CD-Plus, CD-ROM, CD-
ROM
XA-Ready,
CD-I FMV, CD-TEXT, CD-Bridge,
CD-R, CD-RW, Photo-CD (Single &
Multi-Session),
Video
CD,
DVD-VIDEO
Dimensions (WxHxD)
144 mm x 14 mm x 137.5 mm
Weight
About
200
q
Interface
USB 2.0
Read/Write
Speed
Write
(DVD-R): 2x, 4x, 8x
(DVD-R DL): 2x, 4x, 6x
(DVD-RW):
2x, 4x, 6x
(DVD-RAM): 2x, 3x, 5x (Ver. 2.2
&
higher)
M-Disc (DVD+R
SL):
4x
(DVD+R): 2.4x, 4x, 8x
(DVD+R DL):
2.4x, 4x, 6x
(DVD+RW): 2.4x, 3.3x, 4x, 8x
(CD-R): lOx,
16x, 24x
(CD-RW): 4x, lOx, 16x, 24x
Read
:
(DVD-R/RW/ROM): 8x/8x/8x
max.
(DVD-R DL): 8x max.
(DVD-RAM) (Ver.2.2
&
Higher): 6x max.
M-Disc (DVD+R SL): 8x max.
(DVD-Video)
(css
compliant Disc): 4x max.
(DVD+R/+RW): 8x/8x max.
(DVD+R DL): 8x max.
(CD-R/RW/ROM): 24x/24x/24x max.
(CD-DA (DAE)):
24x
max.
* The drive’s appearance and specifications may change without prior notice.
-
The maximum data transfer rate varies according
to
the performance
capabilities
of the PC.
-
For the
sake of
periodic
improvements,
specifications
and appearance are
subject to change without notice.
-
We have taken all
possible
measures
to
assure
the
quality of
our products,
but we cannot be responsible for the consequences if defect occurs.
Data
transfer
rate
Sustained CD-ROM :
3,600
kB/s (24x max)
DVD-ROM : 11.08 MB/s (8x max)
Average Access
Time
(V
3
Stroke)
CD-ROM : 140 ms (Typical)
DVD-ROM : 160
ms
(Typical)
DVD-RAM : 200 ms (Typical)
Buffer capacity 0.75 MB
MTBF
60,000 Power On Hours (Duty Cycle
10
%)
Power Requirement
5
V
DC
Operating
Environment
Temperature
5 °C
to 40
°C
Humidity
15
% to 85 %
Storage
Environment
Temperature
-30
°C to 60
°C
Humidity
10
%
to 90
%
RH
Software
Install the
appropriate CD Recording Authoring
Software before
using this unit.
*
Please
uninstall any
previous CD burning software
you may have
loaded
on
your PC in
order to prevent possible compatibility issues.
Once you have
installed the application software,
you may (if you wish)
begin
to
reinstall
previous software, taking note for errors. We recommend using the drive
with
the
latest
software
as some problems encountered when using the drive can
be solved by
updating the software.
Please visit www.lgservice.com and install the
program,
“LG ODD
Online F/W
update." By using the
program,
you
can automatically check the latest information about
Firmwares
and
update the Firmware.
Worldwide support
;
http://www.LGservice.com
Worldwide corporate
site : http://www.LG.com
Safety Instructions
C€
EU Conformity Notice
LG Electronics hereby declares that
this/these
product(s) is/are
in compliance with
the
essential requirements and other relevant
provisions of Directive 2004/108/EC, 2006/95/EC, 2009/125/EC
and 2011/65/EU.
European
representative :
LG Electronics Inc.
-
EU Representative
Krijgsman
1,
1186 DM
Amstelveen
The
Netherlands
CLASS 1
LASER PRODUCT
KLASSE 1 LASER PRODUKT
LUOKAN 1 LASER LAITE
KLASS 1 LASER APPARAT
CLASE 1 PRODUCTO LASER
CLASSE
1
PRODOTTO LASER
CAUTION
: CLASS 3B VISIBLE AND INVISIBLE LASER RADIATION
WHEN OPEN
AND INTERLOCKS DEFEATED.
AVOID EXPOSURE TO THE
BEAM.
ADVARSEL
: KLASSE 3B SYNLIG
OG
USYNLIG LASERSTRAUNG I ABEN
TILSTAND
OG VED AFBRUDT LASEFUNKTION.
UNDGA AT BLIVE RAMT AF
LASERSTRALEN.
VARO!
: LUOKKA 3B
AVATTAESSA JA KUMOTTAESSA LUKITUS NAKYVAA JA
nAkymAtontA
lasersAteilyA.
vAlta
lasersAteille ALTISTUMISTA.
ATTENTION : CLASSE
3B RAYONNEMENT LASER VISIBLE ET INVISIBLE EN CAS
D'OUVERTURE ET ENCLENCHEMENTS
DEFECTUEUX, EVITER
L'EXPOSITION
AU
FAISCEAU.
VORSICHT : SICHTBARE
UND UNSICHTBARE
LASERSTRAHLUNG DER
KLASSE
3B
WENN ABDECKUNG
GEOFFNET UND SICHERHEITSVERRIEGELUNG
UBERBRUCKT VERMEIDEN
SIE ES, SICH DEM STRAHL AUSZUSETZEN.
ADVARSEL
: KLASSE 3B SYNLIG
OG
USYNLIG LASERSTRALING
NAR
APNES
OG
l_AS BRYTES. unngA
EKSPONERING for strAlen.
VARNING : KLASS 3B SYNLIG OCH OSYNLIG
LASERSTRALNING FOREKOMMER
NAR
OCH MELLANLASET
FORSTORS. UNDVIK EXPONERING UNDER STRALEN.
FCC COMPLIANCE STATEMENT
Note
:
This equipment
has been tested
and found
to
comply with
the limits
for
a Class B digital
device,
pursuant to Part 15 of the FCC Rules.
These limits
are
designed
to
provide reasonable protection against
harmful
interference in
a
residential installation.
This
equipment
generates,
uses,
and
can radiate
radio
frequency energy and, if not
installed and
used in
accordance with the instructions, may cause
harmful interference
to
radio
communications. However,
there is no
guarantee
that interference will not occur in
a
particular
installation.
If this
equipment
does
cause harmful interference
to
radio or
television reception, which can
be determined
by
turning the
equipment
off and on, the user is encouraged
to try to
correct the
interference by
one
or more of the following measures:
-
Reorient or relocate
the
receiving antenna.
-
Increase the separation
between
the
equipment
and
receiver.
-
Connect the equipment into an
outlet
on a circuit
different from that to
which the
receiver
is connected.
-
Consult the dealer
or an
Authorized
Service
Center for help.
•
FCC
WARNING
Changes
or modifications not expressly approved
by
the
party
responsible
for
compliance
could
void the user’s authority to operate
the
equipment.
•
This Drive is for
use only with
UL listed
personal computers that have
installation instructions detailing user-installation
of
card cage
accessory.
Microsoft® and Windows® are trademarks
registered in the United
States and other
countries
by
the Microsoft
Corporation.
The
company names
and
product names
written
in this
manual
are
trademarks or registered trademarks of the
respective
companies.
To Next Page
Need help?
General
