e
a c
Installation
b
d
Screws and wall plugs are not supplied.
,
If your TV is not a wall-mountable, you do not have to use wall
brackets. Just put the unit in front of your TV.
,
Do not install this unit on Metallic furniture.
,
Installing foot cover
You can adjust the height of the unit by using the foot cover. (Foot height : 11/16 inch (17 mm))
Additional Feature
Adjusts sound level of Treble or Bass.
Make the sound clear when the volume is too low. (Dolby
Digital only)
Adjusts the volume level appropriately.
Synchronizes the audio and video. (0 to 300 ms)
MUSIC
CINEMA
FLAT
BOOST
TRE/BASS
STANDARD
Additional Information
Bluetooth Codec SBC
Specication
ENGLISH
Power requirements
120 V ~ 60 Hz
Power consumption 21 W
Amplier Total output 120 W
NOTICE: For Product Identication and Compliance/Safety
labeling information please refer to Main Label on the
bottom of Unit.
Design and specications are subject to change without
notice.
Auto power On/O
This unit automatically turns on by an input source : Optical, LG TV or Bluetooth.
Turns on or o AUTO POWER function.
Turn down the volume when you watch the movie at night.
DISPLAY OFF
DIMMER
SLEEP 180
SLEEP 10
OFF
Adjusts sound level of Sub-woofer.
Auto Function Change
This unit recognizes input signals such as optical, Bluetooth and LG TV and then switches to the suitable
function automatically.
BLUETOOTH LG TV
OPTICAL
Using your TV remote control
You can control some functions of this unit by your TV remote control even when using other company’s
product. Controllable functions are volume up/down and mute.
Press and hold to turn on or o this function.
Make sure that the sound output of your TV is set to [External speaker].
,
Depending on the remote control, this function may not work well.
,
Supported TV brands
,
LG Panasonic Philips Samsung Sharp Sony Toshiba Vizio
To Next Page
Loading...
Need help?
General
Weight and Dimensions
