FUNCTIONSOFCONTROLPANEL
11
SPRAY
(INTENSITY)
• Repeated pressing of the
Spray button will select
Strong, Medium or
Soft.
DELAY START
• If you want to delay the start of
a selected program, press the
Delay Start button.
• Each press of Delay Start will
delay the start of the cycle by
one hour.
• The delay start time can be
adjusted from 1 to 24 hours in
one-hour increment.
HALF LOAD
• In case of a small load, use the
upper or lower rack only to save
energy.
• Each press of the Half Load
button cycles between upper
rack only and lower rack only.
• If you don't press Half Load,
the dishwasher runs normally,
i.e, operation of upper and
lower spray arm alternating
periodically.
POWER
• For operating, press this
button first for power on.
• After operating, the power
automatically switches off
for safety and economy.
• In case of an unusual Power
surge or disturbance, the
power may be automatically
turned off for safety.
CHILD LOCK
• Lock the control buttons
to prevent the settings
from being changed.
• To lock/unlock, press
Spray and Rinse
buttons simultaneously
for 3 seconds with door
open.
NOTE These high temperature rinse sanitizes dishware and glassware in accordance with NSF/ANSI Standard 184 for
Residential Dishwashers. Certified residential dishwashers are not intended for licensed food establishments.
SANITARY/
EXTRA RINSE
• Repeated pressing of the Rinse
button will select Sanitary, Extra
Rinse or both.
• If you select the Sanitary Function,
Sanitary Light blinks when the
water temperature meet sanitary
Temp. and illuminates at the end of
cycle when Conditions have been
met to achieve sanitization.
• When you select Extra Rinse, an
additional rinse cycle is added.
3828DD3004S(영어) 2008.4.12 1:35 PM 페이지11 001 GateRip_A3
To Next Page
Loading...
Need help?
General
