LG SLM3D User Manual

Front Panel
··································Standby / On
·······························Selects Function
·························Adjusts Volume
ASC/BASS BLAST/CINEMA: Selects the sound effect.
NIGHT ON/OFF: Turns down the volume at night.
WOOFER LEVEL +/-: Adjusts the volume level of
subwoofer.
AUTO POWER ON/OFF: Automatically turns on by an
input source.
Replacement of battery
Remote control
Rear Panel
DC IN ·················· Connect to the AC adapter
OPTICAL IN · · · · · · · · · · · Connect to an Optical device
USB
/ ··················Connect to a USB device
Subwoofer Connection1
a Connect the sound bar to the TV using Optical
cable.
b Set up [External Speaker (Optical)] on your TV
setting menu.
TV
Additional Device Connection
a Connect to the external device as follows.
TV
(Set-top Box,
Player etc.)
b Set the input source by pressing F repeatedly.
TV Connection 2
The buttons are located on the rear.
Place the wireless subwoofer near the sound bar and
follow steps below.
a Connect the power cord of the sound bar and
the wireless subwoofer to the outlet.
b Turn on the sound bar.
c The sound bar and wireless subwoofer will be
automatically connected. The subwoofer's
yellow green LED turns on.
Manual Subwoofer Connection
If the subwoofer does not make sound, try to
connect manually.
a Press PAIRING button on the rear of the
wireless subwoofer.
y The yellow green LED on the front of the
wireless subwoofer blinks quickly.
(If the yellow green LED does not blink, press
and hold the PAIRING button.)
b Turn on the sound bar.
c Pairing is completed.
y The yellow green LED on the front of the
wireless subwoofer turns on.
Keep the sound bar and the subwoofer away
from the device (ex. wireless router, microwave
oven, etc.) over 1 m (3.3 ft) to prevent wireless
interference.
>
1 m
(3.3 ft)
Specication
Power
consumption
Refer to the main label.
AC adapter
y Model : DA-38A25
y Manufacturer : Asian Power
Devices Inc.
y Input : 100 - 240 V ~ 50 - 60 Hz
y Output : 25 V 0 1.52 A
y Model : MS-Z1520R250-
038A0-P
y Manufacturer : MOSO POWER
SUPPLY TECHNOLOGY CO., LTD.
y Input : 100 - 240 V ~ 50/60 Hz
y Output : 25 V 0 1.52 A
Dimensions
(W x H x D)
Approx.
890.0 mm x 53.0 mm x 85.0 mm
(35.0 inch x 2.1 inch x 3.3 inch)
Without foot
Bus Power
Supply (USB)
5 V 0 500 mA
Amplier
(Total RMS
Output
power)
300 W RMS
Design and specications are subject to change
without notice.
Additional Information
SK4D.DUSAMLK(SLM3D)_SIM (Sheet)_MFL70585665.indd 5-8 2021-05-28   10:20:37
Front Panel
··································Standby / On
·······························Selects Function
·························Adjusts Volume
ASC/BASS BLAST/CINEMA: Selects the sound effect.
NIGHT ON/OFF: Turns down the volume at night.
WOOFER LEVEL +/-: Adjusts the volume level of
subwoofer.
AUTO POWER ON/OFF: Automatically turns on by an
input source.
Replacement of battery
Remote control
Rear Panel
DC IN ·················· Connect to the AC adapter
OPTICAL IN · · · · · · · · · · · Connect to an Optical device
USB
/ ··················Connect to a USB device
Subwoofer Connection1
a Connect the sound bar to the TV using Optical
cable.
b Set up [External Speaker (Optical)] on your TV
setting menu.
TV
Additional Device Connection
a Connect to the external device as follows.
TV
(Set-top Box,
Player etc.)
b Set the input source by pressing F repeatedly.
TV Connection 2
The buttons are located on the rear.
Place the wireless subwoofer near the sound bar and
follow steps below.
a Connect the power cord of the sound bar and
the wireless subwoofer to the outlet.
b Turn on the sound bar.
c The sound bar and wireless subwoofer will be
automatically connected. The subwoofer's
yellow green LED turns on.
Manual Subwoofer Connection
If the subwoofer does not make sound, try to
connect manually.
a Press PAIRING button on the rear of the
wireless subwoofer.
y The yellow green LED on the front of the
wireless subwoofer blinks quickly.
(If the yellow green LED does not blink, press
and hold the PAIRING button.)
b Turn on the sound bar.
c Pairing is completed.
y The yellow green LED on the front of the
wireless subwoofer turns on.
Keep the sound bar and the subwoofer away
from the device (ex. wireless router, microwave
oven, etc.) over 1 m (3.3 ft) to prevent wireless
interference.
>
1 m
(3.3 ft)
Specication
Power
consumption
Refer to the main label.
AC adapter
y Model : DA-38A25
y Manufacturer : Asian Power
Devices Inc.
y Input : 100 - 240 V ~ 50 - 60 Hz
y Output : 25 V 0 1.52 A
y Model : MS-Z1520R250-
038A0-P
y Manufacturer : MOSO POWER
SUPPLY TECHNOLOGY CO., LTD.
y Input : 100 - 240 V ~ 50/60 Hz
y Output : 25 V 0 1.52 A
Dimensions
(W x H x D)
Approx.
890.0 mm x 53.0 mm x 85.0 mm
(35.0 inch x 2.1 inch x 3.3 inch)
Without foot
Bus Power
Supply (USB)
5 V 0 500 mA
Amplier
(Total RMS
Output
power)
300 W RMS
Design and specications are subject to change
without notice.
Additional Information
SK4D.DUSAMLK(SLM3D)_SIM (Sheet)_MFL70585665.indd 5-8 2021-05-28   10:20:37

LG SLM3D Specifications

General

Brand	LG
Model	SLM3D
Category	Speaker System
Language	English