INSTALLATION INSTRUCTIONS
ENGLISH
9
¡ÆLevel adjustment
• Leveling the washing machine properly prevents
excessive noise and vibration.
Install the appliance on a solid and level floor
surface, preferably in a corner of the room.
• If the floor is uneven, adjust the adjustable feet
as required. (Do not insert pieces of wood, etc.
under the feet.)
• Make sure that all four feet are stable and resting
on the floor and then check that the appliance is
perfectly level.
(Use a leveling tool.)
• After the washer is level, tighten the lock nuts up
towards of the base of the washer. All lock nuts
must be tightened.
ƒRDiagonal Check
When pushing down the edges of the washing
machine top plate diagonally, the machine should
not move up and down at all. (Please, check both
directions.)
If machine rocks when pushing the machine top
plate diagonally, adjust the feet again.
Adjustable feet Adjustable feet
Lock nut
Adjustable feet
To Next Page
Loading...
Need help?
General
