8
Before servicing, ask the customer what the trouble is.
Check the setup (power supply is 120 V AC, remove the transit bolts....).
Check with the troubleshooting guide.
Plan your service method by referring to the disassembly instructions.
Service the unit.
After servicing, operate the appliance to see whether it functions correctly.
■ STANDARD INSTALLATION
The appliance should be installed as follows:
REMOVE THE SHIPPING INSTALL THE APPLIANCE ADJUST THE
BOLTS
ON A FLAT AND FIRM SURFACE
LEVELING
• Remove the 4 shipping bolts • Turn the leveling feet to adjust
with the supplied wrench. the appliance.
※ Do first lower side to remove easily.
• Keep the shipping bolts and
spanner for future use.
• Insert the 4 caps
(provided) into the hole.
• Turn clockwise to raise;
counterclockwise to lower.
4. INSTALLATION & TEST
To Next Page
Loading...
Need help?
General
