E-6
TAKING YOUR BLOOD PRESSURE
6. After the cuff is fully inflated, it will automatically start to deflate and ❤
symbol will appear to indicate that measurement is in progress. Once the
pulse is detected, the symbol will flash with each pulse beat.
7. When measurement is complete, the systolic and
diastolic pressure and pulse rate readings are
displayed. The cuff will automatically deflate
completely, expelling all remaining air.
8. Press START button once to turn off power. The
device has an automatic power-down feature which
turns off power automatically one minute after
measurement is obtained.
9. Remove monitor and make a note of your blood pressure and pulse rate on
the chart in the back of the manual, indicating date and time of measurement.
Additional logbook charts can be downloaded and printed for free at
www.LifeSourceOnline.com or in Canada, www.autocontrol.com.
We advise that you record the date and time after each measurement because an
accurate blood pressure history relies not on single or sporadic readings but on a
pattern over time.
NOTE: Allow at least 5 minutes between measurements on the same
person.
NOTE: If you have poor blood circulation in winter (especially when your
hands and wrists are cold), you may not get a blood pressure measurement.
SYSTOLIC
DIASTOLIC
PULSE
LifeSource Health Line (Toll-Free): 1-888-726-9966
To Next Page
Loading...
Need help?
General
