Lightolier FIXTURE - Connecting Fixtures; Electrical Connections for Runs

LAMPING (FIG. A)
Line UII Dins on lamp with socket and push in. y
REMOVE GUARD AND DIFFUSER
BY UNSCREWING TWO SCREWS.
Torelarnp, simply pull straight out.
(No-polarity of pins required.)
*-
Lamp requirement
Instructions for fluorescent
flxturee uelng 7W or 9W (PL or lT)
\\\
(NOTE 7W rated at O“F.
9W retad at 25”F.)
PLby North American Philips.
“TT” Twin-Tube bv Svlvania, ‘[GA F%
Dulux@ by Osram.- “
w
——