Linksys VELOP Installation Guide

INSTALLATION
GUIDE
Download the Linksys Apps from
Apple Store or Google Play Store
into your mobile phone
Switch off power to your
ONT/Modem
Unplug and remove your old
router from the ONT/Modem
Step 1 Step 2 Step 3
Connect the ethernet cable from
your ONT/Modem to the port near
the “Reset” button of your first
Velop (Master Node)
Ensure your Bluetooth is turned
ON at your mobile phone.
Power up the Velop and wait until
the LED turn solid PURPLE
Step 4 Step 5 Step 6
Open Linksys Apps and follow
the instruction
If the Linksys Apps prompted to
connect to Setup Wi-Fi during the
setup, go to the setting on your
phone and locate the network
name that match the Setup Wi-Fi
printed at the bottom of the
Master Node
Step 7 Step 8

Linksys VELOP Specifications

General

2.4 GHz	Yes
MIMO type	Multi User MIMO
Modulation	256-QAM
Fit AP mode features	Dual-MPP mesh networking, Mesh networking
Networking standards	IEEE 802.11a, IEEE 802.11ac
WLAN channel features	WLAN channel management
Ethernet LAN data rates	1000 Mbit/s
Maximum data transfer rate	1267 Mbit/s
Maximum data transfer rate (5 GHz)	867 Mbit/s
Maximum data transfer rate (2.4 GHz)	400 Mbit/s
Flash memory	256 MB
Management platform	Linksys
Internal	No
Placement	Table
Certification	FCC, IC, CE
Product color	White
LED indicators	Power, Status
Housing material	Plastic
Security algorithms	WPA2-PSK
Service Set Identifier (SSID) features	Hidden SSID
WAN connection	Ethernet (RJ-45)
USB 2.0 ports quantity	0
Ethernet LAN (RJ-45) ports	2
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 80 %
Antenna features	Integrated antenna
Antennas quantity	3
Cables included	LAN (RJ-45)
Number of products included	1 pc(s)
Harmonized System (HS) code	85176990

Weight and Dimensions

Width	78.74 mm
Height	139.7 mm
Weight	320 g