Lippert Components ground control 3.0 Quick Reference

Contact us: Lippert Components Inc. - www.lci1.com/support - Phone: (574) 537-8900 - Email: warranty@lci1.com
Rev: 03.20.2017
Page 2
QR - 014
Quick Reference
GROUND CONTROL
®
3.0 TOUCH PANEL/PAD OPTIONS
B
C
D
F
E
Features
* LED Indicator (Rev. A)
• Off - Touch pad is locked
• Solid Green - Touch pad is active
¤ Blinking Green - Jacks are moving and/or pump active
• Solid Red - Low battery
¤ Blinking Red - Error (Consult OneControl Touch Panel or
OneControl App for instructions.
NOTE: Pressing the UP
and DOWN arrows
simultaneously turns
the touch panel ON.
* LED Indicator (Rev. B)
• Off - Touch pad is locked
• Solid Green - Touch pad is active
¤ Blinking Green - Jacks are moving and/or pump active
• Solid Red - Low battery
¤ Blinking Red - Error: Most codes can be cleared by pressing
"Retract All." Otherwise, consult OneControl Touch Panel
or OneControl App for instructions. Three faults cannot
be cleared from the Auto Leveling Control Touch Pad and
must be addressed inside the trailer: Hall power short, bad
calibration and sensor problem.
¤ Slowly Blinking Faded Red (Red and Green Blinking
Simultaneously) - Jack Fault: Can clear by holding down
"Retract All" until the jacks begin to retract or by utilizing
OneControl Touch Panel or OneControl App.
A
Using the Auto Leveling Control Touch Pad - 5th Wheels
A - Red/Green LED* -
Indicates the status of the
system.
B - Up Arrow - Extends
landing gear (raises the front
of the trailer).
C - Down Arrow - Retracts
landing gear (lowers the
front of the trailer).
D - Auto Level Button
- Initiates Auto Level
sequence.
E - Hitch Height Button -
Initiates smart hitch feature.
F - Retract All Button -
Initiates full retract of all
leveling jacks.

Lippert Components ground control 3.0 Specifications

General

Brand	Lippert Components
Model	ground control 3.0
Category	Lifting Systems
Language	English