Rev: 09.21.20 Page 4 CCD-0003693
As a supplier of components to the RV industry, safety, education and customer satisfaction are our primary concerns. Should you
have any questions, please do not hesitate to contact us at (574) 537-8900 or by email at customerservice@lci1.com. Self-help tips,
technical documents, product videos and a training class schedule are available at lci1.com or by downloading the MyLCI app.
SURESHADE™ POWER BIMINI MANUAL OVERRIDE
TI-356
MARINE
8. Place the front frame assembly on top of the rear frame (Fig. 5).
Fig. 5
9. Zip the front canvas pockets over the loose front frame to help hold it in-place.
NOTE: Canvas top not shown for clarity.
10. Secure the remainder of the front frame in place with zip ties, hook-and-loop strips or with some other
type of cordage.
11. Install protective boot over the frames and canvas.
NOTE: Maximum speed limit in the full down position with boot installed is 65 MPH.
NOTE: Maximum speed limit in the full down position without boot installed is 5 MPH.
12. Store the hex wrench, if provided, (Fig. 6A) inside the actuator.
13. Re-attach the end cap (Fig. 7A) to the actuator.
Front Frame Assembly
Fig. 6 Fig. 7
A
A
To Previous Page
Loading...
Need help?
General
