G920 Driving Force Racing Wheel FAQs 53
Pedal Unit
The pedal units on the G920 racing wheels are also equipped with built-in bolt mounting
points that can be used to secure the pedal unit to a racing rig.
To mount the pedal unit to a racing rig using the bolt mounting points, you’ll need six (6) M6X1
screws to securely fasten the pedal unit to the racing rig.
Cable Management
For optimal cable routing, USB and pedal cables (1, 2) should be routed through the inner
channels. The power and optional shifter cables (3, 4) should be routed through the outer
channels.
Cables may be wrapped multiple times around cable management cleats to take in slack.