LOVATO ELECTRIC ATL800 User Manual

Doc: I435GB04_17.docx 12/07/2016 p. 1 / 31
ATL800
AUTOMATIC TRANSFER SWITCH
INSTRUCTION MANUAL
● Before any maintenance operation on the device, remove all voltages from measuring and supply inputs.
● The manufacturer cannot be held responsible for electrical safety in case of improper use of the equipment.
● The product illustrated herein are subject to alteration and changes without prior notice. Descriptions and information in the catalogue consequently have no contractual relevance.
● A circuit breaker must be included in the electrical installation of the building. It must be installed close by the equipment and within easy of the operator. It must be marked as the equipment’s
disconnecting device: IEC/ EN 61010-1 § 6.12.2.1.
● Clean the equipment with a soft cloth; do not use abrasive products, liquid detergents or solvents.
Contents Page
Introduction 2
Description 2
Front button functions
2
Front LEDs 2
Operating modes 3
Energising the equipment
3
Main menu 3
Password protected access
4
Navigating display pages
4
Synoptic 4
Display pages table 5
Expandability 6
A
dditional resources 6
Communication channels
7
Inputs, outputs, internal variables, counters, analog inputs
7
Limit thresholds (LIMx)
7
Remote variables (REMx)
8
User alarms (UAx) 8
PLC logic (PLCx) 8
Timers (TIMx) 8
A
utomatic test 8
Keypad loc
k
8
IR programming port
9
Parameter setting from PC
9
Parameter setting from smartphone
or tablet with CX02
9
Parameter setting via NFC
9
Parameter settings (setup) from front panel
10
Parameter table 11
System layout 20
A
larms 21
A
larm properties 21
A
larms table 22
Description of the alarms
22
Programmable input functions table
23
Programmable input default
24
Programmable input functions table
24
Programmable output default
25
System layout 25
Command menu 26
Installation 26
Connection diagrams 26
Terminal arrangement
30
Mechanical dimensions and panel perforation
30
Technical characteristics
31
Manual revision history
32
I435GB04 17.docx
CAUTION
● Read this manual before use and installation.
● This equipment must be installed by qualified personnel according to
applicable standards in order to prevent injury or damage to property.

LOVATO ELECTRIC ATL800 Specifications

General

Brand	LOVATO ELECTRIC
Model	ATL800
Category	Switch
Language	English