LS tractor MT468 User Manual

3 -30
(9) Engine Speed Cruise Control(ESC) main switch
ESC main switch
• Position 2 : Resume
• Position 1 : Ready
• Position 0 : Off
 This switch is used to enable the Engine Speed
Cruise Control(ESC) function.
 For cabin models, this switch is installed on the
right-hand cabin pillar.
 For roll bar models, this switch can be installed
optionally on the right lever guide.
 If pressing the ESC main switch from position 0
to position 1 (Off –> Ready),
- ESC indicator on the instrument panel will blink.
- Engine speed stored on ECU will be displayed
on the LCD panel.
 If pressing the ESC main switch from position 1
to position 2 (Ready –> Resume),
① (if pressing below 2 second) – ESC
indicator will be ON and engine speed cruise
control (ESC) will begin.
② (if pressing over 2 second) – current engine
speed will be stored on ECU and the stored
engine speed will blink 3 times on the LCD panel.
 To exit the ESC control,
-. Press the lower side (“Off position”) of the
ESC main switch or
-. Press down the brake pedals.
Cabin
Roll-bar
ESC main switch
(optional)
ESC indicator
LCD panel

LS tractor MT468 Specifications

General

Brand	LS tractor
Model	MT468
Category	Tractor
Language	English