Installation Instructions
Physical Dimensions
o
90
o
90
Product Specifications
40W
120W
240W
Input Voltage
Power Frequency
Outlook Dimensions
Luminaire Net Weight
(±0.3kg / ±0.66Lbs)
Working Temperature
Storing Temperature
AC100-240V / AC100-277V / AC200-240V / AC277-480V
50 / 60Hz
o o o o
-30 C to +45 C (-22 F to +113 F)
o o o o
-40 C to +70 C (-40 F to +158 F)
413×366×83mm
(16.26"×14.41"×3.27")
4.3kg
(9.48Lbs)
With aluminum heat sink, high-brightness SMD chip, high-effciency constant current and voltage power
driver, LED Flood light is designed for applications in large industrial areas like airports, big docks,
squares, stadiums, etc.
Technical Parameters
We appreciate your purchase!
Please read the instruction manual before installation and keep it for future reference.
Reminder
Application
Warning
1. To avoid damage, falling, electric shock or fire, please do not modify the lamp or replace accessories without
confirming with the supplier first.
2. Please authorize only qualified personnel to install the lamp and ensure they follow the instructionmanual.
Any improper installation might cause falling, electric shock, fire, or other injury, damage or hazard.
3. Please disconnect power before installation or any maintenance of the lamp.
4. Please disconnect power if it begins to smoke or emit odors, since fire or electric shock may occur. Ask
qualified person to inspect and maintain the luminaire.
5. Please do not dismantle the lamp without the supplier’s authorization.
6. Please do not touch the power supply when the lamp is operating.
7. If the external flexible cable or cord of the luminaire is damaged, it should only be replaced by the supplier,
a service agent or qualified person.
8. Terminal block not included. Instal lation may require advice from a qualified person.
9. The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent
or a similar qualified person.
10. Only to be installed outside arms reach.
11. For use in environments where an accumulation of non-conductive dust on the luminaire may be expected.
12.Mounting heights of light s not higher than 20m.
Caution risk of electric shock
200W
180W150W
80W
100W
359×308×82mm
(14.13"×12.13"×3.23")
462×452×87mm
(18.19"×17.8"×3.43")
40W/60W/80W
100W/120W/150W
180W/200W/240W
45mm(1.77")
87mm
(3.43")
452mm(17.8")
430mm(16.93")
462mm(18.19")
418mm(16.46")
100mm
(3.94")
240mm(9.45")
42mm(1.65")
83mm
(3.27")
413mm(16.26")
334mm(13.15")
366mm(14.41")
325mm(12.8")
60mm
(2.36")
160mm(6.3")
82mm
(3.23")
359mm(14.13")
40mm(1.57") 276mm(10.87")
308mm(12.13")
265mm(10.43")
11mm(0.43")
25mm(0.98")
55mm
(2.17")
135mm(5.31")
∅11mm(0.43")
60W
4.5kg
(9.92Lbs)
4.6kg
(10.14Lbs)
6.3kg
(13.89Lbs)
6.5kg
(14.33Lbs)
6.8kg
(14.99Lbs)
8.4kg
(18.52Lbs)
8.6kg
(18.96Lbs)
8.9kg
(19.62Lbs)
Bracket mounting (With input line)
Bracket mounting (Without input line)
L
N
GND
brown
blue
yellow/green
Dimmable
DIM-
white
blue
blue
brown
black
white
green
DIM+
gray black
purple white
1.
2.
o o
120 ±5
The cover tempered glass should be
paid attention to avoid collision with
ground when we open the buckle.
The buckle should be opened
by flat blade screwdriver.
11mm(0.43")
∅11mm(0.43")
40mm(1.57")
11mm(0.43")
40mm(1.57")
∅11mm(0.43")
To Previous Page
Loading...
Need help?
General