PAL: Country/region not listed above.
234
<Note>: OSD is not available in C-VIDEO. Some functions are not
available on the control panel and the remote control in this mode.
<Note>: VGA OUT is not supported once C-VIDEO is enabled.
3. DIP switch settings will not availabe until the DC166 has been restarted.
4.2.3 Connecting to a Computer
z Connecting to a computer through USB
Connect the USB cable to the USB port on the DC166 and the USB port
on the computer. Next, download the queue
™ program at
http://www.lumens.com.tw/goto.htm. Please refer to the queue™ user
manual for more detailed instructions.
z Connecting to a computer through VGA IN
Connect the VGA cable to the VGA IN port on the DC166 and the VGA
OUT port on the computer.
English -5
To Next Page
Loading...
Need help?
General
