English - 6
3.1.2 Back View
RS-232 input port, at most 7 cameras can be connected in a serial
connection
RS-232 output port, at most 7 cameras can be connected in a
serial connection
The remote control ID setting is only controlled after corresponding
to the Camera Select on the remote control
DC power supply connecting port
Network cable port supports routers or hubs of PoE+ (IEEE
802.3at) with power supply
Adjust the resolution setting. The default is 1080p/59.94
RS-422 connecting port, at most 7 cameras can be connected in a
serial connection
HDMI output (Audio output supported)
3G-SDI output(Audio output supported)
*Support the audio output of 48 KHz only/resolutions up to 1080p
59.94/50