English - 16
4.2.2.5 Precautions for installation
1. Before installation, please confirm the orientation of the machine relative
to the object to be captured
2. It is recommended that the machine should be set at a distance of more
than 1 meter away from the object to be captured. Please adjust for a
best distance according to the magnification of the lens
3. The machine (including metal plates) is weighed at about 2.5 kg. If it is
to be installed on the ceiling, please use the hanger that has obtained
UL security approval to prevent the machine from falling down.
4. Please check whether the camera is installed securely on a regular
basis
4.2.2.6 Installation steps
1. Please adjust resolution on DIP switch at first
<Remark> Please refer to Chapter 7 DIP Switch Setting for the relevant
descriptions on DIP switch.
2. Fix the metal plate A on the machine base
with 4 M3 silver screws
1 meterā
To Next Page
Loading...
Need help?
General
