5-2 Data Record Function
1) The Data Record function records & displays the maximum
and minimum reading values. To start the Data Record
function by pressing the " Max./Min. Button " ( 3-3, Fig. 1 )
once. There will be a " REC " symbol on the display.
2) With the REC symbol on the display :
(a) Press the " Max./Min. Button " ( 3-3, Fig. 1 ) once and the
" Max " symbol along with the maximum value will appear on
the display.
(b) Press the " Max./Min. Button " again, the " Min " symbol
along with the minimum value will appear on the display.
(c) To exit the memory record function, press the " Max./Min.
Button " continuously for at least 2 seconds. The display will
revert to the current reading.
(d) To clear the Max./Min. value recorded by pressing the
" Hold Button " ( 3-2, Fig. 1 ) once. Previous recorded
Max./Min. value will be given up and then revert to the
REC. function keep on recording.
5-3 Auto Power Off Disable
In order to prolong the battery life, the instrument has "Auto
Power Off " function. The meter will switch off automatically if
no buttons are pressed for around 10 minutes.
5
To Next Page
Loading...
Need help?
General
