Should you not have a power amplifier, the speakers can also be connected directly
to the radio. The relevant operating instructions also contain the connection diagram
for this situation.
Fig. 2
(1) Connect to speaker
(2) Connect to amplifier
(3) Colour-coded
Please note that only limited dynamic reserves will be available in this case.
Excessively low outputs combined with high distortions can destroy your
speakers.
INSTALLING THE GRILLE (FIG. 3)
(1) Mounting surface
(2) Clamp-on nut
(3) Mounting screws
(4) Grille
To Next Page
Loading...
Need help?
General
