O F 8 P A G E S
M•1400/M•1400i
High-Current Power Amplier
AMPLIFIER
M•1400/M•1400i
M•1400/M•1400i
High-Current Power Amplier
O F 8 P A G E S
AMPLIFIER
M•1400/M•1400i
M•1400/M•1400i
High-Current Power Amplier
1
O F 8 P A G E S
AMPLIFIER
M•1400/M•1400i
O F 8 P A G E S
M•1400/M•1400i
High-Current Power Amplier
AMPLIFIER
M•1400/M•1400i
Features
1400 watts max, 1260 watts continuous @ 4 ohms
bridged
Ultra-low-noise/low-distortion design
Fast Recovery circuitry reduces distortion at clipping
Two 2nd order, 12 dB/octave, Bessel low-cut lters with
variable frequency from Off to 170Hz
Constant directivity horn EQ/Air EQ with variable
frequency from 2kHz to 6kHz and on/off switch
Limiter with on/off switch
Balanced/unbalanced 1/4" and XLR inputs
XLR thru outputs
1/4" jacks (M•1400i) or Speakon® (M•1400)
connectors
and 5-way binding post outputs (both models)
Detented gain controls calibrated in dB and volts
Signal present and OL LEDs
Channel Status LEDs
Superior T-Design cooling
Five-year, limited warranty (U.S. only)
Applications
Live sound/music reinforcement for churches,
clubs, schools, conference centers, hotels
High level A/V playback
Large speech systems
(continued on page 8)
M•800 Power Amplier, 1202-VLZ PRO 12-Channel
Mic/Line Mixer, 1402-VLZ PRO 14-Channel Mic/Line
Mixer, 1604 VLZ PRO 16-Channel Mic/Line Mixer,
1642-VLZ PRO 16-Channel Mic/Line Mixer, SR24•4-
VLZ PRO 24 Channel Mic/Line Mixer, SR32•4-VLZ PRO
32 Channel Mic/Line Mixer, CFX Series 12, 16, and 20
Channel Mic/Line Mixer w/Digital Effects, C300z 2-Way
Loudspeaker, C200 2-Way Loudspeaker, SWA1501 and
SWA1801 Active Subwoofers.
R E L A T E D P R O D U C T S
M•1400/M•1400i
The Mackie M•1400/M•1400i is a dual channel, high
output power amplier that incorporates a number of
unique features including FR “Fast Recovery” design,
high continuous-current output, built-in subwoofer
crossovers, and a T-Design constant-gradient cooling
tunnel for improved cooling efciency and output device
reliability.
The M•1400/M•1400i is rated at a continuous out-
put of 250 watts per channel into 8Ω, 425 watts per
channel into 4Ω and 630 watts into 2Ω. In bridge mode
the M•1400/M•1400i is rated at 850 watts into 8Ω
and 1260 watts into 4Ω. Variable low-cut lters on
each channel, with a range from off to 170Hz, enable
tighter bass response and a Constant Directivity Horn
EQ improves high-frequency reproduction. The CD Horn
EQ is 6 dB/octave and its “knee” position is sweepable
from 2kHz to 6kHz. The built-in limiter is channel
independent and helps eliminate clipping. Inputs are
balanced/unbalanced 1/4" and XLR, and XLR thru con-
nectors allow the full-range signal to be routed to another
M•1400/M•1400i. Speaker connections on the M•1400
are Speakon® and binding posts, while speaker connec-
tions on the M•1400i are 1/4" and binding posts.
To effectively deal with clipping, an amplier must
be able to recover almost instantaneously. That is the
denition of “Fast Recovery”. Rather than using nega-
tive feedback to help control clipping distortion, the
M•1400/M•1400i employs a very sparse amount of
negative feedback. The use of Baker Clamp circuits on
the positive and negative voltage amp stages prevents
saturation (and latching) during periods of overdrive. In
addition, a transistor senses when the Baker Clamp is
active and activates the internal limiting circuits. This
results in no latching, instant recovery from overdriving
the amp, and a superior sound.
www.mackie.com
16220 Wood-Red Road NE, Woodinville, WA 98072 USA
800.898.3211, fax 425.487.4337, sales@mackie.com
UK +44.1268.570.808, fax +44.1268.570.809, uk@mackie.com
To Next Page
Need help?
General