7. Insert the bottom hinge at the left side using the two
screws previously removed in step 6.
NOTE: Do not tighten screws.
8. Stand the cabinet.
9. Replace the door making sure the bottom socket
enters the bottom hinge pin. Be sure washer is in
place.
10. While holding the door in the closed position, secure
the top hinge at the left side using the two screws
previously removed at the beginning in step 2. Do not
tighten the screws until the top of the door is leveled
with the top cabinet.
11. Replace the hinge cover.
12. Replace plugs.
13. Tools Required:
- 7/16” socket-ratchet.
- Putty knife or thin-blade screwdriver.
To Next Page
Loading...
Need help?
General
