BODY AIRBAG
SCORPIO
110
CHECK THE RHS PRETENSIONER LINES
FOR SHORT CIRCUIT WITHIN HARNESS
SRSL4
Turn the ignition key to OFF position.
Remove the Airbag simulator from RHS pretensioner harness connector.
Measure the resistance between:
(+) Red Probe of Multimeter
RHS pretensioner connector, harness side
(-) Black Probe of Multimeter
RHS pretensioner connector, harness side
Is the resistance more than 10 Kohms?
YES
An intermittent fault may be present in the wiring
harness. Visually check for chaffed wires or other
physical damage to the harness. If no fault is found
in the circuit, suspect the following component(s):
a) RHS Pretensioner connector.
b) Airbag module connector.
c) Floor Interconnector
d) RHS Pretensioner assembly.
e) Airbag module.
NO
Replace both the Floor and CCB wiring
harness.