34 12
1. Do Not use multimeter or any equipment with power source to check the wiring
of Airbag squib circuits.
3. Before disconnecting the Airbag / Pretensioner units, the ignition switch should be OFF.
4. Do Not short the Airbag system terminations with either vehicle battery supply or ground
or external power source which will damage the system.
IMPORTANT NOTES:
2. Use only Diagnostic software provided to ensure proper connectivity of Airbag System.
The software is capable of detecting any error in wiring connectivity and loop resistance
(Refer table attached for limit values).
To Next Page
Loading...
Need help?
General
