Makita 2704 Technical Information

TCT saw blade ..... 1
Rear table set
(exclusively Europe,
Turkey, South Africa..1
Stand set .................................... 1
Left table set .............................. 1
Rear table set.............................. 1
Joint for connecting a hose.........1
Sliding guide set ........................ 1
Ring 15.8 (257060-5) for use of
25.4mm (1") inner diameter blade........ 1
Ring 16 (257262-3) for use of
30mm inner diameter blade ..................1
Ring 16 (257022-3) for use of 25mm
inner diameter blade .............................1
Model No.
Description
CONCEPT AND MAIN APPLICATIONS
Specification
Standard equipment
Note: The standard equipment and the optional equipment for the tool shown above may differ from country to country.
Ring 15.8 (257060-5) or Ring 16 (257262-3) is factory-assembled for some countries.
Dimensions: mm (")
Height (H)
Length (L)
2704
This is a sister model ranked higher than our current table saw model 2703.
The right sub table extends to rip cutting capacity of 4'x8' material.
The other main different features are below.
* Large machined aluminum table top for accurate cutting work
* Precision rip fence provides accuracy
* Powerful 1650W motor
Table Saw 255mm (10")/ 260mm (10-1/4")
L
W
H
760 (30) 665 (26-1/4)
Europe, Turkey,
South Africa
The others
766 (30-1/4)
344 (13-1/2)
Width (W)
Continuous rating input: W
Rated amperage for North America: A
Bevel cutting capacity: degrees
15.88 (5/8)
1,650
4,800
15
Diameter
Hole diameter
Saw Blade: mm (")
No load speed: min.-1=rpm
Cutting capacity : mm (")
at 90 degrees
at 45 degrees
Electric brake
Double insulation
Power supply cord: m (ft)
Yes
Yes
2.5 (8.2) / Australia and New Zealand: 2.0 (6.6)2.5 (8.2)
No
UK 110V and all 220V-240V countries: Yes
All 110V-127V countries except UK: No
Electronic
feature
Constant speed control
Soft start
Net weight: kg (lbs) 33 (72) 28 (61)
From minus 0.5 to plus 45.5
91 (3-5/8)
63 (2-1/2)
93 (3-5/8)
64 (2-1/2)
Table size (WxL) : mm (")
Main table
Sub table
625x567 (24-5/8x22-1/4)
128x570 (5x22-1/2)
255 (10)
30 (1-3/16)
260 (10-1/4)
The othersEurope, Turkey, South Africa
Max. width of dado: mm (") 21 (13/16)
Canada, USA, Mexico, Panama
Europe: 260mm Other countries: 255mm (10")
25.4 (1)
PRODUCT
T
ECHNICAL INFORMATION
P 1 / 15
Rip fence............... 1
Miter gauge .... ...... 1
Right table set ....... 1
Wrench 19 ............ 1
Socket wrench 13-22 ..1
Ring 15.8 (257060-5) for use of 25.4mm
inner diameter blade exclusively
Canada, USA, Mexico and Panama..... 1
Ring 16 (257022-3) for use of 25mm
inner diameter blade ....1 (It does not comes
with the products for Canada, USA, Mexico,
Panama, Europe, Turkey and South Africa)
Optional accessories
The components of Dado head set
and the relevant parts
(Exclusively Canada, USA, Mexico
and Panama: See instruction manual)........ 1
Hex wrench 5................... 1
Push stick ........................ 1
Joint for connecting a hose
(exclusively Europe,
Turkey, South Africa) ...... 1

Makita 2704 Specifications

General

Input power	- W
Blade bore	15 mm
Blade diameter	255 mm
Saw blade included	-
Idle speed (max)	4800 RPM
Cutting depth (45º)	63 mm
Cutting depth (90º)	91 mm
Product color	Blue, Stainless steel
Placement supported	Tabletop

Weight and Dimensions

Depth	665 mm
Width	753 mm
Height	344 mm
Weight	28000 g
Bore diameter	15.88 mm