Makita 4327 User Manual

9 ENGLISH
Rip fence (optional accessory)
CAUTION:
• Always be sure that the tool is switched off
and unplugged before installing or removing
accessories.
1. Straight cuts
1
Steel base type
1. Rip fence (Guide rule)
When repeatedly cutting widths of 160 mm or less, use
of the rip fence will assure fast, clean, straight cuts.
1
Aluminum base type
1. Rip fence (Guide rule)
To install, insert the rip fence into the rectangular
hole on the side of the base with the fence guide
facing down. Slide the rip fence to the desired cut-
ting width position, then tighten the bolt to secure it.
1
2
3
4
Steel base type
1. Hex wrench 2. Bolt 3. Rip fence (Guide rule) 4. Guide
facing
1
2
3
4
Aluminum base type
1. Bolt 2. Fence guide 3. Hex wrench 4. Rip fence
(Guide rule)
2. Circular cuts
1
2
3
4
Steel base type
1. Treaded knob 2. Guide facing 3. Rip fence (Guide
rule) 4. Pin
1
2
3
4
Aluminum base type
1. Threaded knob 2. Pin 3. Rip fence (Guide rule)
4. Fence guide

Makita 4327 Specifications

General

Stroke height	18 mm
No-load stroke rate	3100 spm
Input power	450 W
Power source	AC
Cutting depth in wood	65 mm
Product color	Black, Blue
Bevel adjustment	Yes
Bevel capacity (max)	45 °

Weight and Dimensions

Depth	217 mm
Width	77 mm
Height	197 mm
Weight	1800 g