Need help?Do you have a question about the Makita DHP487 and is the answer not in the manual?
General| Voltage | 18V |
|---|---|
| Max Torque | 40 Nm |
| Speed Settings | 2 |
| Max Drilling Capacity in Wood | 36 mm |
| Max Drilling Capacity in Metal | 13 mm |
| Chuck Size | 13 mm |
| Chuck Capacity | 1.5 - 13 mm |
| Impacts per Minute (Hi) | 0 - 25, 500 ipm |
| Impacts per Minute (Lo) | 0 - 7, 500 ipm |
| No Load Speed (Hi) | 0 - 1, 700 rpm |
| No Load Speed (Lo) | 0 - 500 rpm |
| Max drilling diameter in masonry | 13 mm |
| Max tightening torque (hard) | 40 Nm |
| Max tightening torque (soft) | 23 Nm |
| Battery Type | Li-ion |
| Length | 164 mm |
| No Load Speed | 0 - 1, 700 rpm |
To Previous Page
