Makita GA7020S User Manual

17 ENGLISH
COMBINATION OF APPLICATIONS AND
ACCESSORIES
Optional accessory
CAUTION: Using the tool with incorrect guards can cause risks as follows.
• When using a cut-o󰀨 wheel guard for facial grinding, the wheel guard may interfere with the work-
piece causing poor control.
• When using a grinding wheel guard for cutting-o󰀨 operations with bonded abrasive wheels and dia-
mond wheels, there is an increased risk of exposure to rotating wheels, emitted sparks and particles,
as well as exposure to wheel fragments in the event of wheel burst.
• When using a cut-o󰀨 wheel guard or grinding wheel guard for facial operations with cup-type dia-
mond wheels, the wheel guard may interfere with the workpiece causing poor control.
• When using a cut-o󰀨 wheel guard or grinding wheel guard with a wheel-type wire brush with a thick-
ness greater than the maximum thickness as specied in "SPECIFICATIONS", the wires may catch on
the guard leading to breaking of wires.
• Use of dust collecting wheel guards for cutting-o󰀨 and facial operations in concrete or masonry
reduces a risk of exposure to dust.
• When using dual purpose (combined grinding and cutting-o󰀨 abrasive) ange mounted wheels, only
use a cut-o󰀨 wheel guard.
2
2
5
2
11
12
13
4
7
8
9
10
1
3
15
14
18
16
17
19
20
21
22
23
24
25
6
16
4
17
6
6
6
4
3
6
7
6
7
4
3
4
3
- Application 180 mm model 230 mm model
1 - Side grip
2 - Wheel guard (for grinding wheel)
3 - Inner ange
4 - Super ange *1
5 Grinding / Sanding Depressed center wheel / Flap disc
6 - Lock nut
7 - Ezynut *1*2
8 - Back up pad
9 Grinding Flex wheel
10 - Rubber pad
11 Sanding Abrasive disc
12 - Sanding lock nut
13 Wire brushing Wire wheel brush

Makita GA7020S Specifications

General

Brand	Makita
Model	GA7020S
Category	Grinder
Language	English