Makita HM1810 User Manual

P 2 / 20
Repair
[1] NECESSARY REPAIRING TOOLS
CAUTION: Disconnect the machine from the power source for safety before repair/maintenance!
1R005 Retaining Ring R Pliers RT-2N
1R023 Pipe Ring (for arbor press)
Removing Retaining ring R-80 from Crank box
Removing Helical gear 47
1R045 Gear extractor, large
1R346 Center Attachment for 1R045 Disassembling Tool retainer section
1R347 Jig for Tool Retainer Disassembling
1R231 1/4" Hex Shank Bit for M8
1R263 Bearing Extractor
Loosening/ tightening Hex socket head bolt M8x75
1R348 Spring Pin Extractor Removing Spring pin 8-40 from Tool retainer shaft
Removing Ball bearings
1R269 Bearing Extractor
1R291 Retaining Ring S and R Pliers Removing Retaining ring S-20 from Crank shaft
784408-3 Socket Bit 13-55 Loosening/ tightening Hex nut M8 that secures Fan 100
Code No. Description Use for
[2] ADHESIVE APPLICATION AND LUBRICATION
[2] -1. Adhesive Application
Apply an appropriate amount of adhesive to the following parts in order to lock them against vibration loosening or
leakage. Be sure to wipe off grease or oil from the parts before adhesive application.
Tool holder
10 Brush holder cap (2pcs) Threaded portion
12 Hex socket head bolt M6x22 (4pcs)
22 Gear housing complete
Threaded portion
16 Hex bolt M5x85 (2pcs) Threaded portion
Figure 8 inlaid portion that contacts Gear housing cover
83 Hex socket head bolt M12x55 (4pcs) Threaded portion
Item No. Description Portion to apply adhesive
76 Hex socket head bolt M5x16 (2pcs) Threaded portion
Threaded portion
94 Hex socket head bolt M12x45 (4pcs)
Fig. 1
22
: ThreeBond 1215
: ThreeBond 1321B or 1324,
or Loctite 242
Barrel
83
94
Gear housing cover
12
16
10
Bearing box
Motor housing B
Field
Motor housing A
Crank housing
76
Plate

Makita HM1810 Specifications

General

Input power	2000 W
Impact energy (max)	44.9 J
Vibration level (chiseling)	9 m/s²
Toolholder	6 mm
Impact rate	1100 bpm
Product color	Black, Blue

Weight and Dimensions

Weight	32000 g