Makita HR2610 User Manual

Model No.
Description
CONCEPT AND MAIN APPLICATIONS
Specification
HR2610/ HR2611F/ HR2610T/ HR2611FT
Combination Hammers 26mm (1")
For information of HR2300 and HR2600 series models,
see “TECHNICAL INFORMATION” of each series.
*Round shank bits can also be used by
replacing the factory-mounted chuck with
Quick change drill chuck (keyless).
Dimensions: mm (")
Width (W)
Height (H)
Length (L)
361 (14-1/4) 385 (15-1/8)
77 (3)
HR2610 HR2610T
HR2611F HR2611FT
209 (8-1/4)
Chuck type
Impacts per minute= minֿ¹
No load speed: minֿ¹= rpm
Specification
Double insulation
Weight according to
EPTA-Procedure 01/2003*3: kg (lbs)
Power supply cord: m (ft)
Variable speed control
Rotation reversing facility
Operation mode
Vibration absorption
Model
Concrete
TCT bit
Steel
Wood
Core bit
Diamond core bit
Capacities:
mm (")
Continuous Rating (W)
Voltage (V) Cycle (Hz)
Input Output
Max. Output (W)
110
120
220
230
240
7.7
7
3.8
3.7
3.5
50/ 60
50/ 60
50/ 60
50/ 60
50/ 60
800
---
800
800
800
400
400
400
400
400
550
550
550
550
550
127 6.6 50/ 60 800 400 550
Current (A)
Torque limiter
HR2610/ HR2611F HR2610T/ HR2611FT
Yes (by trigger)
Yes
Europe, North America: 4.0 (13.1), Australia, Brazil: 2.0 (6.6),
Other countries: 2.5 (8.2)
Yes
0 - 1,200
0 - 4,600
Adapted for
SDS-PLUS shank bits
26 (1)
68 (2-11/16)
2.8/ 2.9
(6.1/ 6.4)
2.9/ 3.0
(6.4/ 6.6)
3 modes
(Rotation only/ Rotation with hammering/ Hammering only)
No/ Yes (AVT
*2) No/ Yes (AVT*2)
80 (3-1/8)
13 (1/2)
32 (1-1/4)
Yes
No/ Yes No/ YesLED Job light
Adapted for SDS-PLUS shank bits
and Round shank bits
*1
*1 Round shank bits can also be used by replacing the factory-mounted chuck with Quick change drill chuck (keyless).
*2 AVT (Anti Vibration Technology); Counterweight mechanism + Damper spring
*3 with side grip
PRODUCT
P 1/ 22
Model Operation Mode LED Chuck type
2 modes
(Rotation only/
Rotation with hammering)
3 modes
(Rotation only/
Rotation with hammering/
Hammering only)
No
No
26mm
Capacity
23mm
23mm
26mm
No
No
Adapted for
SDS-PLUS shank bits
Adapted for
SDS-PLUS shank bits
and Round shank bits*
Yes
No
AV T
No
No
No
Yes
Yes
NoNo
Yes
Yes
No
HR2300
HR2310T
HR2610T
HR2611FT
HR2600
HR2601
HR2611F
HR2610
H
W
L
T
ECHNICAL INFORMATION
HR2610 series models are 26mm (1") combination hammers adapted for
SDS-PLUS bits, featuring compact and lightweight design, enhanced comfort
and better control with ergonomic handle. Model HR2610T/HR2611FT are
equipped with quick change drill chuck while Model HR2611/HR2611FT are
with AVT; Anti Vibration Technology consisting of Active dynamic vibration
absorber with counterweight and Damper spring. AVT ensures operation with
extremely low vibration, which is much superior to the competitors.
HR2610 series models are available in the variations listed below, including
HR2300 and HR2600 series models developed on the same concept.
(The image above is
HR2610/HR2611F.)

Makita HR2610 Specifications

General

Input power	800 W
Power source	AC
Rated speed (max)	1200 RPM
Impact energy (max)	2.3 J
Drilling diameter in wood (max)	32 mm
Drilling diameter in steel (max)	13 mm
Chuck type	SDS Plus

Weight and Dimensions

Weight	2900 g