Makita LS0816F User Manual

2 ENGLISH
ENGLISH (Original instructions)
SPECIFICATIONS
Model: LS0816F
Blade diameter 216 mm (8-1/2″)
Hole (arbor) diameter (country specic) 15.88 mm (5/8″)
Max. kerf thickness of the saw blade 2.8 mm (1/8″)
Max. miter angle Left 47°, Right 47°
Max. bevel angle Left 47°, Right 2°
No load speed (RPM) 5,000 /min
Dimensions (L x W x H) 476 mm x 705 mm x 521 mm (18-3/4″ x 27-3/4″ x 20-1/2″)
Net weight 13.9 kg (30.6 lbs)
Safety class
/II
• Due to our continuing program of research and development, the specications herein are subject to change
without notice.
• Specications may di󰀨er from country to country.
• Weight according to EPTA-Procedure 01/2014
Cutting capacities (H x W) with ø216 mm (8-1/2″) saw blade
Miter angle Bevel angle
45° (left) 0° 2° (right)
0° 36 mm x 305 mm
(1-7/16” x 12”)
65 mm x 305 mm
(2-9/16” x 12”)
60 mm x 305 mm
(2-3/8” x 12”)
45° (left and right) 36 mm x 215 mm
(1-7/16” x 8-1/2”)
65 mm x 215 mm
(2-9/16” x 8-1/2”)
-
SAFETY WARNINGS
General power tool safety warnings
WARNING Read all safety warnings, instruc-
tions, illustrations and specications provided with
this power tool. Failure to follow all instructions listed
below may result in electric shock, re and/or serious
injury.
Save all warnings and instruc-
tions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or BATTERY-
operated (cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2. Do not operate power tools in explosive atmo-
spheres, such as in the presence of ammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
Electrical safety
1.
Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs
with earthed (grounded) power tools. Unmodied plugs
and matching outlets will reduce risk of electric shock.
2. Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of elec-
tric shock if your body is earthed or grounded.
3. Do not expose power tools to rain or wet con-
ditions. Water entering a power tool will increase
the risk of electric shock.
4. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords
increase the risk of electric shock.
5.
When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric shock.
6. If operating a power tool in a damp location is unavoid-
able, use a Residual Current Device (RCD) protected
supply. Use of an RCD reduces the risk of electric shock.
7. Power tools can produce electromagnetic
elds (EMF) that are not harmful to the user.
However, users of pacemakers and other similar
medical devices should contact the maker of their
device and/or doctor for advice before operating
this power tool.

Makita LS0816F Specifications

General

Brand	Makita
Model	LS0816F
Category	Saw
Language	English