PRODUCT
P 1/ 37
Models No.
Description
CONCEPT AND MAIN APPLICATIONS
Specification
LS1016, LS1016L
Slide Compound Miter Saw 255mm (10")*1/ 260mm (10-1/4")
[*1 255mm (1") for North America]
LS1016 and LS1016L are upgraded sister tools of LS1013 series models,
featuring DXT (Deep eXact cutting Technology) achieved by our consistent
pursuit of cutting larger size workpiece but with higher accuracy.
The features and benefits of DXT are:
Deep cutting
3-Stage reduction gear unit and Movable rear blade guard provide
larger capacities of cutting Crown molding and Baseboard (Skirt board)
which are typical workpieces of slide compound miter saws.
eXact cutting
Precise and exact cutting obtained by employing:
Double sliding mechanism
Double sliding guide fence
Quick and accurate miter angle lock, etc
LS1016L additionally features laser marker for easy cut line alignment.
T
ECHNICAL INFORMATION
No load speed: min-1 = rpm
Double insulation
Diameter
Hole diameter
Protection against electric shock
Cord length: m (ft)
Net weight*3: kg (lbs)
Lock-off switch
Electric brake
Electronic
control
Soft start
Constant speed
Saw blade:
mm (")
Yes
Yes
Yes
Yes
Laser marker
YesNo
3,200
250 (9-7/8) - 260 (10-1/4)
European countries: 30, North America: 15.88 (5/8), Other countries: 25.4 (1)
2.5 (8.2)
23.6 (52.0) 23.7 (52.2)
Net weight*2: kg (lbs) 24.1 (53.1) 24.2 (53.3)
Standard equipment
Optional accessories
Note: The standard equipment for the tool shown may differ by country.
Vertical vise ............................... 1
TCT saw blade .......................... 1
Dust bag .................................... 1
Socket wrench 13 ....................... 1
Triangular rule ........................... 1
Spare lock-off button .................. 2
Holder set ................................... 2 (all countries except North America)
Hex wrench ................................ 1 (LS1016L only)
Horizontal vise
Dust box
TCT saw blades
Portable miter saw stand
Crown molding stopper set
Dimensions: mm (")
Width (W)
Height (H)
Length (L)
718 (28-1/4)
671 (26-1/2)
640 (25-1/4)
W
L
H
120
110
220
230
240
15 1,510
---
900 2,60050/60
7.2 1,510 800 2,00050/60
6.9 1,510 800 2,00050/60
6.6 1,510 800 2,00050/60
15 900 2,60050/60
Continuous Rating (W)
Voltage (V) Cycle (Hz)
Input Output
Max. Output (W)
Current (A)
*2 Weight according to EPTA-Procedure 01/2003, with
TCT saw blade and "Blocking mechanism at the rest position"
*3 With TCT saw blade, without "Blocking mechanism at the rest position"
See next page for the cutting capacities.
Model No.
LS1016 LS1016L
Specification
To Next Page
Need help?
General
