Makita TD127DWE User Manual

4 ENGLISH
ENGLISH (Original instructions)
SPECIFICATIONS
Model TD126D TD127D
Capacities Machine screw 4 mm - 8 mm
Standard bolt 5 mm - 14 mm
High tensile bolt 5 mm - 12 mm
No load speed (min
-1
) 0 - 2,400 0 - 2,300
Impacts per minute 0 - 3,000
Overall length 173 mm
Net weight 1.4 kg 1.5 kg
Rated voltage D.C. 14.4 V D.C. 18 V
• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange
without notice.
• Specicationsmaydifferfromcountrytocountry.
• Theweightmaydifferdependingontheattachment(s),includingthebatterycartridge.Thelightestandheavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Batterycartridge D.C.14.4 V Model BL1413G / BL1415G
D.C.18 V Model BL1813G / BL1815G
Charger DC18WA
• Someofthebatterycartridgesandchargerslistedabovemaynotbeavailabledependingonyourregionof
residence.
WARNING: Only use the battery cartridges and chargers listed above.Useofanyotherbatterycartridges
andchargersmaycauseinjuryand/orre.
Intended use
The tool is intended for screw driving in wood, metal
and plastic.
Noise
ThetypicalA-weightednoiseleveldeterminedaccord-
ing to EN62841:
Model TD126D
Sound pressure level (L
pA
) : 92 dB (A)
Sound power level (L
WA
) : 103 dB (A)
Uncertainty(K):3dB(A)
Model TD127D
Sound pressure level (L
pA
) : 93 dB (A)
Sound power level (L
WA
) : 104 dB (A)
Uncertainty(K):3dB(A)
Wear ear protection
Vibration
The vibration total value (tri-axial vector sum) deter-
mined according to EN62841:
Model TD126D
Work mode : impact tightening of fasteners of the
maximumcapacityofthetool
Vibration emission (a
h
) : 9.5 m/s
2
Uncertainty(K):2.0m/s
2
Model TD127D
Work mode : impact tightening of fasteners of the
maximumcapacityofthetool
Vibration emission (a
h
) : 8.5 m/s
2
Uncertainty(K):2.0m/s
2
NOTE: The declared vibration emission value has
been measured in accordance with the standard test
methodandmaybeusedforcomparingonetoolwith
another.
NOTE: The declared vibration emission value
mayalsobeusedinapreliminaryassessmentof
exposure.
WARNING: The vibration emission during actual
use of the power tool can differ from the declared
emissionvaluedependingonthewaysinwhichthe
tool is used.
WARNING:Besuretoidentifysafetymeasures
to protect the operator that are based on an estima-
tion of exposure in the actual conditions of use (taking
accountofallpartsoftheoperatingcyclesuchas
the times when the tool is switched off and when it is
running idle in addition to the trigger time).
EC Declaration of Conformity
For European countries only
TheECdeclarationofconformityisincludedasAnnexA
to this instruction manual.

Makita TD127DWE Specifications

General

Brand	Makita
Model	TD127DWE
Category	Impact Driver
Language	English