Makita UC3020A User Manual

2
SPECIFICATIONS
• Due to our continuing programme of research and development, the specifications herein are subject to change
without notice.
• Note: Specifications may differ from country to country.
Symbols
END218-1
The following show the symbols used for the tool. Be
sure that you understand their meaning before use.
...................Read instruction manual and follow
the warnings and safety instructions.
...................DOUBLE INSULATION
....................Caution: particular care and attention
required!
....................Caution: withdraw the mains plug
immediately if the cable is damaged!
....................Caution: kickback!
....................Protect against rain and damp!
....................Wear a helmet, goggles and ear pro-
tection!
....................Wear safety gloves!
....................Withdraw the mains plug!
....................First aid
...........Recycling
....................CE marking
............Maximum permissible length of cut
............Direction of chain travel
....................Chain oil
Model UC3020A UC3520A UC4020A
Max. chain speed (m/s) 13.3
Cutting length 300 mm 350 mm 400 mm
Saw chain
Type 90SG
Pitch 3/8”
Acoustic power level L WA av dB (A)
to EN 50144 -1 1)
105.3
Sound pressure level L pA av dB (A)
at the workplace to EN 50144 -1 1)
92.3
Vibration acceleration a h,w av to ISO 50144-2-13 1)
- Front handle m/s
2
3.4 3.9
- Rear handle m/s
2
4.0 4.5
Oil pump Automatic
Oil tank capacity (l) 0.20
Power transmission Direct
Chain brake Manual
Run-down brake Mechanical
Overall length (without guide bar) 436 mm
Net weight 3.8 kg
Extension cable (optional)
DIN 57282/HO 7RN -F L=30 m max.,3x1.5 mm
2
1) The data assign equal weight to the full-load and maximum speed operating conditions.
RE Y

Makita UC3020A Specifications

General

Power source	AC
Chain pitch	3/8 \
Chain speed	13 m/s
Product color	Black, Blue
Chain bar length	300 mm

Weight and Dimensions

Width	436 mm
Height	244 mm
Length	200 mm
Weight	4300 g