EasyManuals Logo
Home>Manitowoc>Ice Maker>Indigo

Manitowoc Indigo User Manual

Manitowoc Indigo
4 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
Manitowoc Ice
2110 South 26
th
Street, P.O. Box 1720, Manitowoc, WI 54221-1720 USA 000009168
Telephone 920-682-0161, Fax - Sales: 920-683-7589, Service/Parts: 920-683-7585, Other: 920-683-7879
Page 3 of 4
Web Site -
www.manitowocice.com Rev 01
i. Once complete the display goes back to the home
screen and the CPU and display green LED lights
begin to flash again.
Verify the correct Model and Serial number are programmed into the control board.
Verify the model and serial number on the display matches the model and serial number on the
data plate. If they match remove the flash drive - If they do not match continue with the steps
below.
j. Under Service > Repl Cntrl Bd > Manual Setup - Scroll down to the line below the model number
k. Begin to enter the model number IY, ID or IR, then press the Checkmark; The display should auto fill with the rest
of the model number - If the model number does not auto fill, repeat the firmware flash by repeating steps a
through i.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Manitowoc Indigo and is the answer not in the manual?

Manitowoc Indigo Specifications

General IconGeneral
BrandManitowoc
ModelIndigo
CategoryIce Maker
LanguageEnglish

Related product manuals