Maintenance Section 4
18
Part Number 040002909 11/13
B. Remove the Water Trough
• Remove the upper thumbscrew.
• While supporting the water trough remove the
thumbscrew from beneath the water trough.
• Remove the water trough from the bin area.
C. Remove the Ice Damper
• Remove thumbscrew from bin switch cover.
• Support ice damper and then pull bin switch cover
and ice damper forward to remove.
D. Remove the Water Distribution Tube
• Distribution tube thumbscrews are retained to
prevent loss. Loosen thumbscrews but do not pull
thumbscrews out of distribution tube.
• Loosen the two outer screws and pull forward on the
distribution tube to release.
Water Distribution Tube Removal
UPPER THUMBSCREW
LOWER THUMBSCREW
2. SUPPORT ICE DAMPER THEN
SLIDE RIGHT SIDE FORWARD TO REMOVE
1. REMOVE THUMBSCREW
1. REMOVE THUMBSCREWS
2. PULL DISTRIBUTION TUBE
FORWARD TO REMOVE
To Next Page
Loading...
Need help?
General