Manitowoc NEO UY0240W Technician's Handbook

Part Number STH042 7/15 95
Operational Analysis 1 2 3 4
Safety Limits
Refer to “Analyzing Safety
Limits” to eliminate all non-
refrigeration problems.
Stops on safety limit:
1 or 2
Stops on safety limit:
1
Stops on safety limit:
1 or 2
Stops on safety limit:
1
Freeze Cycle
DischargePressure
________ ______ ______ 1 minute Middle End
If discharge pressure is High or Low, refer to freeze cycle high or low discharge pressure problem
checklist to eliminate problems and/or components not listed on this table before proceeding.
Freeze Cycle
SuctionPressure
________ ______ ______ 1 minute Middle End
If suction pressure is High or Low refer to freeze cycle high or low suction pressure problem checklist to
eliminate problems and/or components not listed on this table before proceeding.
Suction pressure is
High
Suction pressure is
Low
Suction pressure is
High
Suction pressure is
High

Manitowoc NEO UY0240W Specifications

General

Brand	Manitowoc
Model	NEO UY0240W
Category	Ice Maker
Language	English